1 / 1
Brand Name : | maxmach |
---|
製品説明
この床デッキロール成形機は、鋼板の連続圧延および冷間成形のための特別な設備である。
フロアデッキロール成形機鋼板を原材料とし、偏肉し、連続圧延、冷間圧延
成形し、自動的にサイズに切断し、完成したパネルを支持体に出力する。
フロアデッキロール成形機は、PLC制御、AC周波数、速度調整技術を採用し、連続自動生産、
したがって、それは本当に鋼構造のための省エネと高効率の生産設備の新しいタイプです。
床デッキロール成形機の技術パラメータ
Item |
Para |
Memo |
|
Suitable material |
Type |
galvanized steel, colored steel |
|
Thickness (mm) |
0.75-1.25 |
|
|
Yield Strength (Mpa) |
230 |
|
|
Width (mm) |
1220 |
|
|
Forming Speed (m/min) |
About 15 |
Not including cutting time |
|
Roller quantity |
About 30 stands |
Depend on actual design |
|
Forming main motor power(KW) |
5.5kw*3 |
Depend on actual design |
|
Main hydraulic station power(KW) |
5.5 |
Depend on actual design |
|
Decoiler motor power (KW) |
5.5 |
Depend on actual design |
|
Decoiler hydraulic station power (KW) |
3 |
Depend on actual design |
|
Total power |
30.5 |
Depend on actual design |
|
Power |
AC440V,60Hz,3 Phase |
|
|
Dimension (L×W×H, m) |
27×3×2 |
Depend on actual design |
|
|
|
|
Name |
Model/Name |
Quantity |
Technical Description |
1.Decoiler system |
6T automatic decoiler (JK6-1250AM) |
1set |
Arm type, hydraulic expand, electrical motor decoil, supersonic control, with coil car. |
2. Main forming system |
Feeding guide device |
1set |
1. Roller material:38CrMoAl with surface nitrified 2. Roller shaft material: 45# steel after quenching and tempering treatment 3. Roller inner supporting structure type: column 4. Motor driving, the back/forward rollers driven by chain, part of upper/lower rollers driven by gear 5. Cutting blade material Cr12 quenched treatment |
Roll forming system |
1set |
||
Post-cutting device |
1set |
||
3. Output system |
Stacking system |
1set |
1.Stacker length is 6m. 2.This system`s air source has to be prepared by customer, air pressure be higher than 0.5MPa; air flow be more than 0.5 cubic meter per minute; and air source shall be dry and clean. |
4. Hydraulic system |
1set |
Main machine using outside-placed hydraulic station. Decoiler using inside-placed hydraulic station. |
|
5. Electric control system |
1set |
1. PLC Control, encoder automatic cutting in length 2. Operation mode: Touch screen+ button 3. adjusting the speed by AC frequency conversion |
フロアデッキロール成形機の作業工程
デコイル→ ガイド送り → ロールフォーミング → 長さカット → 仕上げパネルスタッキング
フロアデッキロール成形機の 梱包と出荷
MAXMACHグループの詳細
このサプライヤーにお問い合わせを送ってください