1 / 5
Model No. : | YL-2010-1 |
---|---|
Brand Name : | YL |
製品説明
私たち供給 1 ペア配電ボックスのドロップ ワイヤ モジュール/STB モジュール非常に競争力のある価格で、1 の一つ一つのピース ペア配電ボックスのドロップ ワイヤ モジュール/STB モジュールは、顧客に納入する前にワーク ショップでテストします。 光ケーブル 1 ペア配電ボックスのドロップ ワイヤ モジュール/STB モジュールの設計および ISO9001 登録施設で製造。 製品の範囲は、シングル モードとマルチモードのおさげ髪と rohs 指令の基準に完全修飾であるおさげ髪の両方をカバーしています。 アセンブリがすべて主要な光ファイバー光コネクタ型の利用ケーブルの色は、使用可能なオプションの範囲。
1 ペア配布ボックス ドロップ ワイヤ モジュール/STB モジュール
の説明
接続の端子は外部と内部のスペースの分配配線を接続するために適応します。その建設は、双方向の前に接続したチェーンのコントロール測定を行う可能性を提供します。ボックスは、環境への影響からの保護を提供します。
接続の端子台住宅と長方形の形のカバーとも 5 から成っているハウジングに固定接続の極性の単位。カバーが固定されて共通の軸を超える住宅;しかし、それは絞り条件による作業の利便性を確保する住宅から分離できます。ワイヤの導入は、さまざまなサイズのワイヤーを適用することの可能性を確保する着脱式のスタッフィング ボックスを通して行われます。接続部の内側にある金属製のネジは、ワイヤーを固定します。
サイズ
技術的な特徴
コンタクトの接触の特徴
分配線のコネクタ
Range of the section: |
diameter 0,4- 1,2 mm |
Diameter on the isolation: |
it is maximal 5 mm |
The current-response characteristics: |
20 A(10 A on each conductor) during not less than 10 min, without the deformation of the module |
Insulation resistance * |
|
[Dry" atmosphere: |
> 10 12 Ohm |
[Moist" atmosphere (standard ASTM Of d618, procedure F): |
> 10 12[Om] |
Salt fog: (standard ASTM Of b117) |
> 10 10 Ohm |
Immersion beside the water: (15 days before 3% solution Of naCI) |
> 10 10 0[m] |
The contact resistance |
|
R of material + R of the contact cross connection + by R of the contact connection of the wires |
< 10 m |
Increase in the contact resistance |
|
After climatic testings: |
<2,5 m |
After 50 connections - turning offs: |
<2,5 m |
Dielectric strength: |
>3 kV of direct current during 1 minute |
力学的特性
Screw of the connection of the distributive wire/conductor of the pair |
Special alloy Of zamac, [passivirovannyy], with the paint and varnish coat |
Housing of the unit of the connection of the distributive wire: |
Transparent polycarbonate |
Housing: |
Polycarbonate, glass-reinforced, resistance to fire [VO" |
Fitted contacts: |
Tinplated phosphor bronze |
Contacts of the grounding: |
Alloy of SI - Zn - Ni - Ag |
Contacts of the connection: |
Tinplated solid bronze |
Sealing material before the lower part: |
The epoxy resin |
Sealing material before the upper cable part: |
Silicon compound |
Cover of the pair/of the distributive wire: |
Polycarbonate |
Housing of the insertable module: |
Polycarbonate, glass-reinforced, resistance to fire [VO" |
Sealing material of the insertable module: |
Gel |
The ring gasket: |
Elastomer EPDM |
Cable laying is/the distributive wire |
Thermoplastic rubber |
Housing and the cover of the box: |
Polycarbonate, color RAL 7035 |
Unit of the grounding: |
Stainless steel |
Stuffing box: |
Elastomer EPDM |
なぜ私達を選ぶか?
我々 はあらゆる種類のケーブル、パッチパネル、ジャック、プラグ、フェイス プレート、キャビネット、光ファイバー ケーブル、パッチコード、および無線機器などネットワーク製品の製造に特化します。自社ブランドは「YULIANG」です。私たちはまた、多くの有名な企業の代理人として行動します。8 自動生産ラインの熟練労働者によって運営されてあります。すべての製品は、ISO9001 規格によると厳密に生産されています。
我々 は、良いアフター サービスを提供しています。ご質問、お気軽にいつでもお問い合わせください。
注文:
当社の製品は、北アメリカ、南アメリカ、東ヨーロッパ、西ヨーロッパ、中央アメリカ、北ヨーロッパ、南ヨーロッパ、中東、アフリカで人気があります。そして彼らは同時に良い評判を達成しました。顧客の要求に従って OEM および ODM サービスも提供できます。あなたの順序を歓迎している!
配信:
一般に、私たちはあなたの支払いを受け取った後 7-10 日以内の商品を提供します。一方、競争力のある輸送サービス利用規約、海、空気または速達便を提供可能性があります。もちろん、別の方法を任命するように。
このサプライヤーにお問い合わせを送ってください