1 / 5
Model No. : | YL-2010-4 |
---|---|
Brand Name : | YL |
製品説明
私たちは4Pair STB Module Distribution Points Boxを非常に競争力のある価格で提供します。ドロップワイヤモジュール/ STBモジュール用4ペア配電ボックスはすべて、お客様に出荷する前にワークショップでテストされています。
ドロップワイヤーモジュール/ STBモジュール用4対配電ボックスのファイバーケーブルは、ISO9001登録施設で設計、製造されています。
製品範囲は、シングルモードとマルチモードのピグテールとピグテールの両方をカバーし、RoHS基準に完全準拠しています。
アセンブリは、すべての主要な光ファイバコネクタタイプで使用できます。さまざまなケーブルカラーオプションが用意されています。
ドロップワイヤーモジュール/ STBモジュール用の 4 ペアの配布ポイントボックス
説明
接続の端子ブロックは、外部および内部パッドの配線を接続するのに適合します。その構成は、両方の方向の前に連結チェーンの制御測定を行う可能性を提供する。ボックスは、環境への影響から保護します。
接続端子ブロックは、矩形のハウジングとカバーと、ハウジングに固定された5極の接続ユニットで構成されています。カバーは、ハウジングと共通の軸を超えて固定される。しかしながら、締め付けられた状態のため作業の利便性を保証するためにハウジングから絶縁することができる。ワイヤの導入は、異なるサイズのワイヤを適用する可能性を保証する取り外し可能なスタッフィングボックスによって達成される。ワイヤの固定は、接続ユニットの内部にある金属製のネジで行います。
技術特性
接点接続の特性
配電線のコネクタ
Range of the section: |
diameter 0,4- 1,2 mm |
Diameter on the isolation: |
it is maximal 5 mm |
The current-response characteristics: |
20 A(10 A on each conductor) during not less than 10 min, without the deformation of the module |
Insulation resistance * |
|
[Dry" atmosphere: |
> 10 12 Ohm |
[Moist" atmosphere (standard ASTM Of d618, procedure F): |
> 10 12[Om] |
Salt fog: (standard ASTM Of b117) |
> 10 10 Ohm |
Immersion beside the water: (15 days before 3% solution Of naCI) |
> 10 10 0[m] |
The contact resistance |
|
R of material + R of the contact cross connection + by R of the contact connection of the wires |
< 10 m |
Increase in the contact resistance |
|
After climatic testings: |
<2,5 m |
After 50 connections - turning offs: |
<2,5 m |
Dielectric strength: |
>3 kV of direct current during 1 minute |
機械的特性
Screw of the connection of the distributive wire/conductor of the pair |
Special alloy Of zamac, [passivirovannyy], with the paint and varnish coat |
Housing of the unit of the connection of the distributive wire: |
Transparent polycarbonate |
Housing: |
Polycarbonate, glass-reinforced, resistance to fire [VO" |
Fitted contacts: |
Tinplated phosphor bronze |
Contacts of the grounding: |
Alloy of SI - Zn - Ni - Ag |
Contacts of the connection: |
Tinplated solid bronze |
Sealing material before the lower part: |
The epoxy resin |
Sealing material before the upper cable part: |
Silicon compound |
Cover of the pair/of the distributive wire: |
Polycarbonate |
Housing of the insertable module: |
Polycarbonate, glass-reinforced, resistance to fire [VO" |
Sealing material of the insertable module: |
Gel |
The ring gasket: |
Elastomer EPDM |
Cable laying is/the distributive wire |
Thermoplastic rubber |
Housing and the cover of the box: |
Polycarbonate, color RAL 7035 |
Unit of the grounding: |
Stainless steel |
Stuffing box: |
Elastomer EPDM |
なぜ私たちを選ぶ?
私たちは、ケーブル、パッチパネル、ジャック、プラグ、フェイスプレート、キャビネット、光ケーブル、パッチコード、無線機器など、あらゆる種類のネットワーキング製品の製造に特化しています。私たち自身のブランドは "ユリヤン"です。我々はまた、多くの有名な企業の代理人として行動する。我々は巧みな労働者が運営する8つの自動生産ラインを持っています。すべての製品は、ISO9001規格に準拠して製造されています。
我々は良いアフターサービスを提供しています。ご不明な点がございましたら、お気軽にお問い合わせください。
注文:
当社の製品は、北米、南米、東ヨーロッパ、西ヨーロッパ、中米、北欧、南ヨーロッパ、中東、アフリカで人気があります。そして彼らは同時に良い評判を達成しました。我々はまた、顧客の要件に応じてOEMとODMサービスを提供することができます。あなたの注文は歓迎されています!
配送:
一般的に、私たちはお支払いを受け取ってから7-10日以内に商品をお届けします。一方、私たちはあなた、海、空、または速達で競争力のある配送条件サービスを提供することができます。もちろん、あなたは好きなように別の方法を指定することができます。
このサプライヤーにお問い合わせを送ってください